Manitou
MLA-T 516-75 H
The Manitou MLA-T 516-75 smaller telescopic wheel loader, combines its strength within the telescopic boom and the agility of an articulated chassis.
Overview
Static tipping load with forks (straight): 2732 kg
Static tipping load with bucket (straight): 3535 kg
Max. height of bucket pivot point: 5.03 m
I.C. Engine power rating: 74.30 Hp
More info
This gives the operator the manoeuvrability that is often requested when working inside buildings together with the extra reach that has become a bullet point in modern farms. This machine shares similar features to the MLA 7-75, where comfort and performance are key. The hydrostatic transmission gives power and smoothness when requested. True 360° visibility will allow the operator to gain productivity in safe conditions. The operator station is fully adjustable and exceeds all modern levels of comfort.
Full Specification
Static tipping load with bucket (straight): 3535 kg
Static tipping load with forks (straight): 2732 kg
Static tipping load with forks (full turn): 2000 kg
Max. payload with forks as per EN 474-3 (80%): 1600 kg
Max. height of bucket pivot point: 5.03 m
Max. lifting height (below forks): 4.84 m
Max. outreach: 3.30 m
Unladen weight (with forks) with 4-post canopy: 5543 kg
Overall length to carriage (without hitch): 4.95 m
Overall width of 4 posts canopy: 1.28 m
Overall cab width: 1.28 m
Overall width (over tyres): 1.74 m
Overall height with 4 posts canopy: 2.48 m
Articulation angle: 44 °
Ground clearance: 0.31 m
Engine brand: Deutz
Engine model: TD_3_6_L4
Environmental norm: Stage 3B
Number of cylinders / Capacity of cylinders: 4 – 3600 cm³
I.C. Engine power rating / Power (kW): 74.30 Hp / 55.40 kW
Max. torque / Engine rotation: 330 Nm / 1600 rpm
Engine cooling system: 2 radiators water + hydraulic oil
Transmission type: Hydrostatic
Number of gears (forward / reverse): 2 / 2
Max. travel speed (may vary according to applicable regulations): 30 km/h
Travel speed (laden): 20 km/h
Differential lock: Machine Lock Rear & front
Parking brake: Manual
Hydraulic pump type: Gear pump
Hydraulic flow – Pressure: 70 l/min / 200 Bar
High-Flow Option (l/min): 110 l/min
Drive hydraulic system pressure: 380 Bar
Hydraulic oil: 74 l
Fuel tank: 102 l
Vibration to whole hand/arm: < 2.50 m/s²
Safety cab homologation: ROPS – FOPS cab (level 1)
Image Gallery
