Manitou
MLA 7-75 H-Z
The Manitou MLA 7-75 is the largest wheel loader in the range with a standard lift arm.
Overview
Static tipping load with forks (straight): 2741 kg
Static tipping load with bucket (straight): 3378 kg
Max. height of bucket pivot point: 3.47 m
I.C. Engine power rating: 74.30 Hp
More info
The hydrostatic transmission is smooth at low speed and very powerful in demanding circumstances. With gearshift and 100% diff lock controls on the joystick, the operator is always in control. With optional 30 kph and lift arm suspension, the MLA 7-75 will bring you in full comfort from one jobsite to another. The Z-bar loader linkage gives you the extra break-out force, return to dig and parallel guidance. Whether in agricultural or in construction environment, this wheel loader performs at its best in tough conditions and never lets you down.
Full Specification
Static tipping load with bucket (straight): 3378 kg
Static tipping load with bucket (full turn): 2621 kg
Static tipping load with forks (straight): 2741 kg
Static tipping load with forks (full turn): 2174 kg
Max. height of bucket pivot point: 3.47 m
Max. lifting height (below forks): 3.28 m
Breakout force with bucket: 5906 daN
Unladen weight (with forks) with 4-post canopy: 4781 kg
Unladen weight (with forks): 4953 kg
Overall length to carriage (without hitch): 4.44 m
Wheelbase: 2.06 m
Overall width of 4 posts canopy: 1.28 m
Overall cab width: 1.28 m
Overall width (over tyres): 1.74 m
Overall height with FOPS removed and ROPS folded: 1.99 m
Overall height with 4 posts canopy: 2.48 m
Overall height with cab: 2.48 m
Tilt-up angle: 45 °
Tilt-down angle: 45 °
Articulation angle: 45 °
Ground clearance: 0.31 m
Engine brand: Deutz
Engine model: TD_3_6_L4
Environmental norm: Stage 3B
Number of cylinders / Capacity of cylinders: 4 – 3600 cm³
I.C. Engine power rating / Power (kW): 74.30 Hp / 55.40 kW
Max. torque / Engine rotation: 330 Nm / 1600 rpm
Engine cooling system: 2 radiators water + hydraulic oil
Transmission type: Hydrostatic
Number of gears (forward / reverse): 2 / 2
Max. travel speed (may vary according to applicable regulations): 30 km/h
Travel speed (laden): 20 km/h
Differential lock: Machine Lock Rear & front
Parking brake: Manual
Hydraulic pump type: Gear pump
Hydraulic flow – Pressure: 70 l/min / 200 Bar
High-Flow Option (l/min): 110 l/min
Drive hydraulic system pressure: 380 Bar
Hydraulic oil: 74 l
Fuel tank: 102 l
Vibration to whole hand/arm: < 2.50 m/s²
Safety cab homologation: ROPS – FOPS cab (level 1)
Image Gallery
