MLA 1-25 H

Static tipping load with bucket (straight): 875 kg
Static tipping load with bucket (full turn): 702 kg
Static tipping load with forks (straight): 666 kg
Static tipping load with forks (full turn): 523 kg
Max. height of bucket pivot point: 2.71 m
Max. lifting height (below forks): 2.50 m
Breakout force with bucket: 1080 daN

Unladen weight (with forks) with 4-post canopy: 1744 kg
Ground clearance: 0.19 m
Overall length to carriage (without hitch): 2.74 m
Wheelbase: 1.35 mm
Overall width of 4 posts canopy: 0.79 m
Overall width (over tyres): 0.86 m
Overall height with 4 posts canopy: 2.19 m
Tilt-up angle: 40 °
Tilt-down angle: 45 °
External turning radius (over tyres): 2.10 m
Articulation angle: 45 °
Standard tyres: Mitas – As Farmer – 7 00 12

Engine brand: Yanmar
Environmental norm: Stage 3A
Engine model: 3TNV76
Number of cylinders / Capacity of cylinders: 3 / 1100 cm³
I.C. Engine power rating / Power (kW): 24.33 Hp / 18 kW
Max. torque / Engine rotation: 65.60 Nm / 1800 rpm
Engine cooling system: 2 radiators water + hydraulic oil

Transmission type: Hydrostatic
Number of gears (forward / reverse): 1 / 1
Max. travel speed (may vary according to applicable regulations): 13 km/h
Differential lock: Limited slip differential on front & rear axles
Parking brake: Manual

Hydraulic pump type: Gear pump
Hydraulic flow / Pressure: 30 l/min / 207 Bar
Drive hydraulic system pressure: 320 Bar

Hydraulic oil: 34 l
Fuel tank: 26 l

Vibration to whole hand/arm: 2.50 m/s²

Safety cab homologation: ROPS – FOPS cab (level 1)